Memory Function; Saving Memory Settings - Yamaha DPX-830 Owner's Manual

9 MEMORY function

◆ Saving memory settings

The memory function saves up to 3 patterns of the image quality settings for each input source. Following is the list of items that can be saved.
• GAMMA* • SATURATION
• CONTRAST • HUE
• BRIGHTNESS • SHARPNESS
• COLOR TEMP.* • BrilliantColor
*
You can not change the customized setting in GAMMA and COLOR TEMP. for each memory number.
1. Press one of the MEMORY buttons on the remote controll where you wish to store the settings.
2. Adjust the each item listed above in the IMAGE menu.
• The settings are automatically stored.
• You can also use the picture quality adjusting bottons on the remote control (see page 6).
MENU KEYSTN
MEMORY
1 2 3
CONT. BRIGHT C.TEMP
GAMMA SHARP IRIS
SETTING
To exit from the menu:
3. Press the MENU button several times.
To activate the stored memory settings:
1. Press one of the MEMORY buttons on the remote control.
• The image quality settings that are stored in the selected memory is activated.
MEMORY 1
To exit from the menu:
2. Press the same MEMORY button that you selected in step 1.
Important
• When the input source is changed, the projector automatically reverts to the previousely selected memory setting.
• When RESET ALL in the INITIAL menu is selected, all the settings that are stored in the memory will be cleared (see page
25).
30
TM
MEMORY buttons
Picture quality adjusting
buttons