Device Information - Sartorius LA Reference Series Operating Instructions Manual

Device Information

Purpose
This menu item enables you to have
information displayed about the specific
balance ("device"), as well as "FlexPrint"
information.
Displaying Device Information
§ Select the Setup menu:
press the o key
> "SETUP" is displayed:
§ Select "Info":
Repeatedly press the q soft key, then
press the O soft key
> Device information is displayed:
SETUP INFO
Version no.:
Bal. ver. no.:
Model:
Serial no.:
oo
§ Print device information:
Press the r key
34
> Printout (Example)
--------------------
23.02.2000
Model
Ser. no.
Vers. no.
(Version of the operating program)
ID
(User-ID)
--------------------
SETUP
--------------------
Version-no.:
(Version of the operating program)
Wgh. sys. vers:
(Version no. of the weighing cell)
Model:
Serial no.:
Next mainten.:
01-35-18
00-20-12
LA5200P
Service phone:
70906913
SQmin:
--------------------
§ Return to SETUP overview:
press the o soft key
§ Exit Setup menu:
press the oo soft key
> Original settings are restored
Factory Settings
Each parameter category has a factory
setting. In the Setup menu, you can
restore all factory settings by confirm-
ing the selection
The following settings are not restored:
– Language
– Password
– Display contrast
– Time (clock)
13:02
LA5200P
91205355
01-35-18
BECKER123
INFO
DEVICE
01-35-18
00-20-12
LA5200P
91205355
01.01.2004
00495513080
100.00 g
YES
.
Display Flexprint Information
§ Select the Setup menu:
press the o key
> "SETUP" is displayed:
§ Select "Info":
press the q soft key repeatedly and
then the O soft key
§ Select "FlexInfo":
press the q soft key and then
the O soft key
> The FlexPrint information is displayed,
with print instruction file name,
software ID and version number:
$ To select a particular print file name
with software ID (for example, ID403),
if desired:
press key q or Q as required
> If the display shows ID--- :
The weight block for legal metrology is
not printed by this print file.
> Display of version number:
V.xx.xx.xx
Created by Sartorius:
V.S.xx.xx.xx
§ Return to SETUP overview:
press the o soft key
§ Exit Setup menu:
press the oo soft key
> The device returns to the previous mode