Individual Identification Codes - Sartorius LA Reference Series Operating Instructions Manual

Individual Identification Codes (ID)
Purpose
With this function you can assign
identifiers to values for documentation
and printouts.
You can use this extra function
in combination with a program from
Application 1 (e.g., counting, weighing
in percent), one from Application 2
(checkweighing, time-controlled func-
tions) and one from Application 3
(totalizing, formulation, statistics) as
well as with the other extra functions.
Available Features
– Store up to 4 IDs; these can be stored,
changed or deleted individually.
– Each ID consists of a name and a value;
both can be defined by the user.
– ID designations are configured in the
Setup: Input menu.
– Each ID designation can have up to
20 characters; when you enter the value
later, however, no more than 15 charac-
ters of the designation are displayed.
– The ID values are entered while the
application program is active; press the
ID soft key to toggle to the ID input
mode.
– Each ID value can have up to
20 characters.
– Access 1 of the 4 IDs directly using the
numeric keys. The other three can only
be accessed by pressing the
to toggle to the identifier input mode.
– You can assign this function to the
fourth or fifth soft key (from the right),
i.e. F4 or F5.
– You can configure when the ID is
included on the printout
(see "Preparation," next page).
– You can configure the position of IDs
on the individual or total printout.
– The designation is printed flush left;
the value flush right. If the name and
value together are too long for one line,
the data is printed on two lines.
– Optional configuration in the Setup
menu to delete a single character when
entering an identifier by pressing c.
Setup: Device: Keys: CF function for
input: Delete last character
– Press the
an ID
ID
soft key
Delete
soft key to delete
Factory Settings for ID Designations
ID1: ID1
ID2: ID2
ID3: ID3
ID4: ID4
Factory Settings for ID Values
No values set
Factory Settings for Other Parameters
Printout:
Each time the print key
is pressed
Soft Key Functions
ID
Toggle to "Identification
codes" menu
Delete
Delete input of selected ID
99