Bosch Professional GHO 18V-LI Original Instructions Manual page 14

14 | English
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
While working, always hold the planer in such a way
u
that the planer base plate lies flat against the work-
piece. Otherwise the planer could slip and cause injury.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for planing wood-based materials
such as beams and boards while resting firmly on the work-
piece. It is also suitable for chamfering edges and for rebat-
ing.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Chip ejector (either right or left)
(2) Knob for setting the cutting depth
(insulated gripping surface)
(3) Cutting depth scale
(4) Changeover lever for chip ejector direction
(5) Lock-off function for on/off switch
1 609 92A 5TN | (23.06.2020)
(6) On/off switch
A)
(7) Rechargeable battery
A)
(8) Battery release button
(9) V-grooves
(10) Planer base plate
(11) Handle (insulated gripping surface)
(12) Hex key
(13) Blade head
(14) Clamping element for planer blade
(15) Fastening screw for planer blade
A)
(16) HM/TC planer blade
(17) Extraction hose (dia. 35 mm)
A)
(18) Chip/dust bag
A)
(19) Parallel guide
A)
(20) Scale for rebate width
(21) Locking nut for rebate width setting
(22) Fastening screw for parallel/angle guide
A)
(23) Angle guide
(24) Locking nut for angle adjustment
(25) Fastening screw for rebate depth guide
A)
(26) Rebate depth guide
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Planer
Article number
Rated voltage
A)
No-load speed
Cutting depth
Rebate depth
Max. planing width
Weight according to EPTA-Pro-
B)
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable battery ProCORE18V
12.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
A)
A)
A)
A)
A)
GHO 18V-LI
3 601 EA0 3..
V 18
-1
min 14,000
mm 0–1.6
mm 0–8
mm 82
kg 2.3–3.4
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools