Toshiba e-STUDIO330AC Hardware Troubleshooting Manual page 28

1.TROUBLESHOOTING FOR THE HARDWARE
4 Press [Yes] when "Cancel print job?" appears.
The print job is canceled.
If you do not want to cancel the print job
To restart the job without canceling it, replace the paper in the drawer with that corresponding to the size set in
the equipment after the paper misfeed is cleared. Then if you press [No] in step 4, the job can be restarted. In this
case, it is not necessary to follow step 5 and later.
Press [User Functions - User-] on the touch panel to access the User Functions menu.
5
6 Press the [User] tab to enter the User menu and press [Drawer].
7 Press the drawer button indicated in the message.
28 Clearing a Paper Misfeed