Assembly And Installation Tips; Unpacking Boxes; Fastener Tips - Precor QUEENAX PF175 2D Installation/Assembly Manual

Wall solution

Table of Contents

Assembly and Installation Tips

Place part and assembly boxes as close to the installation location as possible.

Keep all individual part and assembly fastener hardware together. Do not intermix or use

fastener hardware for other than the intended part installation.

Keep fastener hardware with the intended part or assembly: Each training app and

optional shipping box contains all the parts and fasteners required to assembly and install that

item. Keep all fasteners shipped with a part together. Do not interchange, mix, or use fasten-

ers from one part to install a different part. Doing so will make it difficult to complete the build

and if a fastener is missing, make it difficult to know which fastener type is missing and needs

replacement.

IMPORTANT: Do not interchange optional and training app part fasteners. When unpack-

ing part boxes, keep the fasteners with the part and do not intermix with other parts. This

will make it easy to assemble and identify any missing fasteners.