Attaching The Frame Unit - Yamaha Silent Bass SLB200 Owner's Manual

■ Attaching the Frame Unit

The Silent Bass is shipped from the factory with the Frame Unit removed from the main body.
Please properly attach the Frame Unit using the following procedure.
1
Open the upper arm support on the frame unit, until it comes in contact with the stopper.
2
With the support's arm section (Fixing Knob 2) still closed, mount the frame unit onto the upper part of
the main body and gently slide it into position.
3
Tighten Fixing Knob 1.
4
Rotate the support arm section counter-clockwise to open it up, and insert the support's lock (Fixing
Knob 2) into its receiver on the back of the Silent Bass.
5
Firmly tighten Fixing Knob 2 to secure the frame unit to the instrument.
When moving the frame unit's parts, be careful not to pinch your fingers,
hands, etc.
Frame attachment is complete.
To remove the frame unit, simply reverse the procedure described above.
Upper Arm Support
Tighten
5
Fixing Knob 2
• Securely tighten Fixing Knobs 1 and 2. Using the instrument with the attachments loose can result in
parts rattling or making noise during performance.
• When transporting the instrument, always hold it by its neck or main body. Holding by the frame unit only
may result in damage to the frame unit.
2
Slide onto body
1
Open
Open
4
Receiver
3
Tighten
Fixing Knob 1
Arm Section
Fixing Knob 2
9