Replacing A Hard Disk Drive - Sun Microsystems Sun Cobalt Control Station Maintaining And Upgrading The Hardware

Replacing a hard disk drive

If a hard disk drive fails in your Sun Cobalt Control Station, you can replace the
drive.
Specifications for a hard disk drive
Sun Microsystems™ recommends that the hard disk drive you select meet the
specifications listed in Table 1. A hard disk drive that does not meet these
specifications can cause reliability problems in your server.
Table 1. Specifications for the hard disk drive
Specification
Peak current draw
Rotational speed
Interface
Operating temperature
Operating humidity
Upgrading the Hardware—Sun Cobalt Control Station
Value
Must not exceed:
1.8 amperes max (at 12 volts)
0.7 amperes max (at 5 volts)
5400 rpm
Ultra ATA-33 EIDE or faster
Must be able to operate in environments up to
55° C
10% to 90% (non-condensing)
Replacing a hard disk drive
7