Reverb Return Level; Chorus; Turning The Chorus Effect On Or Off - Yamaha Portatone PSR-530 Owner's Manual

Digital Effects
The RevRtnLv (Reverb Return Level) parameter sets the amount of reverb effect
returned from the reverb effect stage, thus making it possible to adjust the degree of
reverb effect applied to the overall sound.
1
Select the Digital Effect "RevRtnLv" Function
Use the MENU [ ] and [ ] buttons to move the triangular indicator in the display
next to "DIGITAL EFFECT", then use the SUB MENU [ ] and [ ] buttons to select
"RevRtnLvl".
2
Set the Reverb Return Level
Use the [–] and [+] buttons, number buttons, or data dial to set the desired reverb
return level (the current return level value appears to the left of "RevRtnLv" on the
display). The range is from "0" to "127". The higher the value the greater the return
level.

Chorus

The PSR-530's 9 chorus effects can be used to give your sound extra life and
animation. See "The Digital Effect List" on page 108.
Press the [CHORUS] button so that the CHORUS icon appears in the display to turn
the selected chorus effect on. Press [CHORUS] a second time so that the CHORUS
icon disappears to turn the CHORUS effect off.
The CHORUS effect applies only to the R1. Chorus can be turned completely off
by selecting the "Off" chorus type as described below.
38

Reverb Return Level

RevRtnLv
064

Turning the Chorus Effect On or Off

CHORUS
116
HARMONY TEMPO
CHORUS DSP
• The CHORUS effect
will be turned on or off
according to the se-
lected R1 panel voice.