Yamaha Portatone PSR-530 Owner's Manual page 125

* 1 The tracks for each channel can be selected on the panel.
See page 92 for more information.
* 2 Incoming MIDI messages control the PSR-530 as 16 chan-
nel multi timbral tone generator when initially shipped
(factory set). The MIDI messages don't affect the panel
controls including the Panel Voice selection since they are
directly sent to the tone generator of the PSR-530. However,
the following MIDI messages affects the panel controls
such as Panel Voice, Style, Multi Pad and Song settings:
• MIDI MASTER TUNE, MASTER TUNE (XG System
Parameter).
• TRANSPOSE (XG System Parameter).
• System Exclusive Messages related to the REVERB,
CHORUS and DSP EFFECT settings.
Also, the MIDI messages affect the panel settings when one
of the folowing MIDI reception modes is selected.
These modes can be selected on the panel (see page 94).
MIDI Implementation Chart
rE (Remote): The Note On/Off messages received at the
designated Remote (receive) channel are
processed the same as the notes normally
played on the keyboard.
In this mode, only the following channel mes-
sages will be recognized:
• Note On/Off
• Control Changes
Bank Select (R1 voice only)
Modulation
Volume
Expression
Sustain
Sostenute
Soft Pedal
All Notes Off
• Program Change (R1 voice only)
• Pitch Bend
Off: The MIDI channel messages will not be received at the
designated channel.
* 3 Though these messages will not output by playing the
keyboard and changing the panel settings, they may be
included in the Song or Style data and output.
123