Verifying Remaining Battery Power; Activating / Deactivating The Smart Pause Function - Sennheiser EPOS ADAPT 660 User Manual

23 Additional functions

Verifying remaining battery power

You can retrieve information on the remaining battery power at any time – except while you are in a call:
Tap and hold the finger on the touch pad until a voice prompt is announced.
X
?

Activating / deactivating the Smart pause function

The headset is equipped with a motion sensor that registers when the headset is put in or out of rest position. By factory
default, Smart Pause is inactive.
Smart Control
ADAPT 660 Bluetooth
®
80%
4s
When the battery power drops below 2%, the LED flashes red and "Recharge headset" is
announced several times.
Smart pause
headset
The remaining battery power is shown in the Smart Control
app.
Some mobile devices indicate the battery status of the
headset.
LED Remaining battery power
more than 80%
more than 60%
more than 40%
more than 20%
more than 2%
You can use the following functions:
• Media playback pauses when you remove the headset
and continues when you put it on again.
• A call is accepted when you put on the headset
• A call is put on hold when you remove the headset
during a call and resumed when you put it on again.
Start the Smart Control app.
X
Go to Settings.
X
Activate or deactivate
X
Smart pause.