Appendix; Display Messages - Yamaha MOTIF-RACK Owner's Manual

Yamaha tone generator owner's manual
Hide thumbs Also See for MOTIF-RACK:
Table of Contents

Advertisement

Appendix

Messages
Are you sure?
Bulk protected.
Completed.
Device number is off.
Device number mismatch.
Effect plug-in is not supported.
Executing...
MIDI buffer full.
MIDI checksum error.
MIDI data error.
Multi plug-in is not in PLG2.
Now checking plug-in board.
Please keep power on.
Plug-in 1 communication error.
Plug-in 2 communication error.
Receiving MIDI bulk...
System memory crashed.
Too many favorites.
Transmitting MIDI bulk...
76

Display Messages

Display Messages
Confirms whether you want to execute a specified operation or not.
Bulk data was received when RcvBulkSw was set to "protect." (Utility mode, Ref. #158)
The specified save, format, or other job has been completed.
Bulk data cannot be transmitted/received since the device number is off.
Bulk data cannot be transmitted/received since the device numbers don't match.
The Effect Plug-in board cannot be used with the MOTIF-RACK.
Never attempt to turn off the power while data is being written to internal memory. Turning the power off
in this state results in loss of all user data and may cause the system to freeze.
Failed to process the MIDI data because too much data was received at one time.
An error occurred when receiving bulk data.
An error occurred when receiving MIDI data.
The Multi-Part Plug-in board does not work because it has not been installed to PLG2. The Multi-Part
Plug-in board should be installed to PLG2.
The MOTIF-RACK is checking the Plug-in board installation status when powering the MOTIF-RACK on.
Never attempt to turn off the power while data is being written to internal memory. Turning the power off
in this state results in loss of all user data.
The Plug-in board that has been installed to PLG1 does not work.
The Plug-in board that has been installed to PLG2 does not work.
The MOTIF-RACK is receiving MIDI bulk data.
Writing data to internal memory has failed because the power was turned off during the operation. User
data has been initialized automatically. Turn the power off, then turn the power on again.
You've attempted to assign more than 256 voices to the Favorite category.
The MOTIF-RACK is transmitting MIDI bulk data.
Information

Advertisement

Table of Contents
loading

Table of Contents