Using The Sound Editor; Using The Library Files (Patches) Found In The Cd-Rom - Yamaha MagicStomp Owner's Manual

Using the Sound Editor

The Sound Editor for MAGICSTOMP lets you do the following:
• In the accompanying CD-ROM → (Macintosh only:"International" folder → )"Sample"
folder → "Library Files" are some additional patches that can be used in the MAGICS-
TOMP. These patches differ from the Preset Patches (P01-P99) found in the MAGICSTOMP.
You can select patches you like from the library and transfer them into the MAGICS-
TOMP's User Patches (U01-U99) for use.
• With the MAGICSTOMP's three control knobs you can control only three parameters. But
the Sound Editor for Magic Stomp lets you edit all of the effect's parameters. You can also
edit patch type (effect type), patch names, and assign the parameters to be controlled by
the MAGICSTOMP's three control knobs. The edited patches can also be transferred to
the MAGICSTOMP's User Memory at any time
About the communications between the Sound Editor for MAGICSTOMP (com-
puter) and the MAGICSTOMP.
• Data sent from the Sound Editor for MAGICSTOMP can only be received by the MAGICSTOMP
when it is in its normal operating mode (when a patch is selected and the effectis switched "ON").
Data can not be received if the effectis switched "OFF" or when the MAGICSTOMP is in the Name
Edit Mode, Store Mode, or Tuner Mode.
• The Sound Editor For MAGICSTOMP is not effected by MAGICSTOMP operation.

Using the Library Files (Patches) found in the CD-ROM

1
Using the supplied USB cable, connect the MAGICSTOMP to your computer.
2
Start the Sound Editor for MAGICSTOMP application.
n
If you want to store the patches found in the MAGICSTOMP's User Patch memory you should
backup (page
Patches overwrites the current User Patch data with new data.
3
Insert the accompanying CD-ROM into your computer.
4
Click on the "Open" button in the toolbar to display the "Open File" dialog box.
Select the library file from within the (Macintosh only:"International" folder →) "Sample"
folder. Then click the "Open" button on the dialog box.
Open Button
8) that data at this point. Transferring library files into the MAGICSTOMP's User
(page 6).
4
(page 14)