Yamaha MagicStomp Owner's Manual page 18

5 "Receive" button
Click this to open the "Receive" dialog to receive all settings from MAGICSTOMP.
"Receive" Dialog
Patch data can be received in bulk from your MAGICSTOMP. Select the bulk patch data you
wish to receive, then click the [Start] button. The progress bar shows how much of the data
has been received. Finally, click the [Close] button to quit the dialog.
1 "Receive Type" ......Click this and choose the Patch data (internal/external/all) to receive.
2 Progress bar ..........Indicates how much of the data has been received.
3 [Start] button..........Sends a bulk dump request to the connected MAGICSTOMP which
4 [Close] button ........Click this to close this dialog.
n
The MIDI Device Number has to be set correctly in order to receive bulk data. For further details,
see page 16.
1
2
3
This setting is fixed to "User" with the MAGICSTOMP.
then starts transmitting the data to the computer. When the computer
starts receiving data, the button changes to "Stop" and cancels the
bulk receive if clicked while data is being received.
4
18