Installation; Packaging Contents - GE 21838 User Manual

Installation

Packaging Contents

Model name: 21838
Packaging contents
Base stations
Handsets
Power plugs
Telephone line
Batteries, type AAA, "1.2V
600mAh"
Charging station
Operating instructions
Please check the contents of the package carefully. If anything is
missing or shows signs of transport damage, do NOT put the
telephone into service! In such a case, contact either your sales outlet
with the purchase receipt.
Note: Keep the equipment package so that it will not be damaged in
the event of transport.
Connecting the Base Station and Power Plug
Connecting the plugs to the corresponding sockets in the base station
(they can not be connected incorrectly because the sockets and plugs
are designed prevent reverse poling). Lay the cable under the
telephone to the rear. Plug the telephone line in the telephone
connection socket. Insert the power plug at the other end in the power
outlet. The base station in now ready to operate.
Only use the connection cable supplied.
Phone jack
CAUTION:
Plug the adapter to the socket outlet that near the equipment
and shall be easily accessible. Use only the Thomson Telecom power
supply that came with this unit. Using other power supplies may
damage the unit.
Connecting the charging Station (Duo pack only)
Insert the power in the socket on the rear side of the charging station.
Insert the power plug at the other end in the power outlet. The
charging station in now ready to operate.
AC power outlet
Solo pack Due pack*
1 1
1 2
1 2
1 1
2 4
0 1
1 + optional 1 + optional
AC power outlet
– 3 –