GE 21838 User Manual page 13

If a base is found, user will be asked to enter the personal
identification number PIN for that base. If the input PIN is correct,
the registration procedure will be completed with a confirm tone.
Base Station Settings (using the
Handset)
Barring Calls
The following options are available for selection for barring calls:
Option Description
DISABLE All telephone calls are possible.
EXTERNAL All external calls are barred.
NUMBER Define a number which should be barred, e.g. 0190
Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the submenu BARRING and
press "INT/OK" key.
Enter the PIN (factory setting is 0000) and press "INT/OK"
key.
Use or key to select the handset which should be
barred and press "INT/OK" key.
Use or key to select an option and press "INT/OK"
key.
If you select NUMBER, enter a number with maximum 5 digits
and then press "INT/OK" key to confirm the setting.
Base Ringer
Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the submenu RINGER and
press "INT/OK" key.
Press or key to select the ringer volume (0-5) and
press "INT/OK" key.
Note: If you set the base ringer volume to 0, the base ringer will be
off.
Press or key to select the ringing melody (1-10) and
press "INT/OK" key.
Changing the Flash Time
Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the submenu FLASH TIME
and press "INT/OK" key.
Press or key to select the required flash time (100ms,
300ms or 600ms) and press "INT/OK" key.
Changing the Dialling Mode
Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the submenu DIAL MODE and
press "INT/OK" key.
Press or key to select the required dialling mode
TONE or PULSE and press "INT/OK" key.
Changing the PIN
Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the submenu CHANGE PIN
and press "INT/OK" key.
Enter the old PIN (default setting = 0000) and press "INT/OK"
key.
Enter a new PIN (e.g. 1111) and press "INT/OK" key.
'REPEAT' will display and enter the new PIN again (e.g. 1111).
Press "INT/OK" key to confirm.
Note: maximum of 8 digits can be entered.
– 13 –