Table of Contents
Advertisement
D
I
ESKTOP
3
2
1. Attach the base plate.
2. Plug the telephone line cord into the PHONE LINE jack on the base and
into a modular jack.
3. Plug the power supply cord into the POWER 9V DC jack on the base and
into an AC outlet.
4. Set the T/P switch to T for touch-tone service, or P for pulse (rotary)
service. If you don't know which type of service you have, check with
the phone company.
5. Set RING switch (on the handset) to ON.
6. Raise the base antenna.
7. Place handset in the base to charge for 12 hours. The CHARGE/PAGE
light (on the base) comes on to indicate that the battery is charging. If
you don't charge the handset battery properly (for 12 hours) when you
first set up the phone, its long-term performance will be compro-
mised.
NOTE: Use only the Thomson power supply that came with this unit
(5-2420A or 5-2420B ). Using other adapters may damage the unit.
NSTALLATION
6
7
4
T/P switch
1
3
Advertisement
Table of Contents
