Yamaha EMX62M Owner's Manual page 9

• To connect a second player, use the LINE jack or Hi-
Z jack.
• You cannot use the Hi-Z jack and the Low-Z jack for
the same channel at the same time. If a microphone
has already been connected to the Low-Z jack of a
channel, you cannot connect a player to the Hi-Z
jack of the channel.
• Connect a recorder to the REC OUT jacks.
Connecting an electric acoustic guitar or electric bass
Connect an electric acoustic guitar or electric
bass to the Super Hi-Z jacks.
You can use either or both of the 1 and 2 jacks.
EMX62M
Electric-acoustic
guitar
• If you wish to use a guitar signal processor or bass
effect unit, connect them to the Hi-Z jack or LINE
jack. You cannot use the Hi-Z jack and the Low-Z
jack for the same channel at the same time. If a
microphone has already been connected to the Low-
Z jack of a channel, you cannot connect the effect
unit to the Hi-Z jack of the channel.
Connecting an electronic musical instrument
To the EMX62M's LINE jacks, you can connect
an electronic musical instrument such as a syn-
thesizer, drum machine, signal processor con-
nected to an electric guitar, etc. Refer to the
diagram below to make a stereo connection from
the output jacks (such as L/MONO and R) of an
electronic musical instrument to the LINE jacks
in stereo.
If you wish to connect multiple instruments,
make a monaural connection as shown below.
Electric bass
• You can also use the Hi-Z jacks and Super Hi-Z
jacks to connect multiple instruments. You cannot
use the Hi-Z jack and the Low-Z jack for the same
channel at the same time. If a microphone has
already been connected to the Low-Z jack of a chan-
nel, you cannot connect an instrument to the Hi-Z
jack of the channel.
EMX62M Quick Guide
EMX62M
Synthesizer,
Drum machine,
Guitar processor
EMX62M
EMX62M—Owner's Manual
7