Yamaha Clavinova CLP- 785 Owner's Manual page 83

 Manual Setup
Make sure to connect the USB wireless LAN adaptor (sold separately) to the
USB [TO DEVICE] terminal, otherwise the displays for setup will not be
shown.
1.
To call up the network list, perform steps 1 – 2 in the
"Displaying the Wireless LAN Networks and connecting to
a Network" (page 81).
2.
Select "Other" at the bottom of the network list, then press
the [>] button.
3.
Set the SSID, Security and Password to the same as the
settings on the access point.
3-1.
Select the "SSID" then press the [>] button to call up the
display for SSID input, then enter the SSID.
For details on how to enter the characters, refer to "Renaming files" on
page 70. After entering the SSID, press the [FUNCTION] button to
finalize the setting. Operation returns to the "Other" display.
3-2.
Select "Security" then press the [>] button to call up the
Security list. Select the security then return to the "Other"
display by pressing the [<] button.
3-3.
Select "Password," then set the password in the same way as
SSID.
4.
Select "Connect >" at the bottom of the display shown in
step 3, then press the [>] button to start connecting.
When connection is done successfully, "Completed" is shown in the
display, and returns to the "Select Network" display.
5.
Connect the smart device to the access point.
For instructions on the setup for the smart device, refer to the "Smart
Device Connection Manual" on the website (page 8).
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
Connections
NOTE
The password cannot be set
when you select "none" for the
security setting.
83