Yamaha Clavinova CLP- 785 Owner's Manual page 121

2-2.
Secure the bottom end of B using four
tapping screws (4 × 20 mm).
2-3.
Securely tighten the screws on the top of B
that were attached in step 2-1.
3.
Mount A.
Be sure to place your hands at least 15 cm away from
either end of the main unit when positioning it.
Align the screw holes.
CAUTION
• Be extra careful not to drop the main unit or let your fingers
be pinched by it.
• Do not hold the main unit in any position other than the
position specified above.
4.
Secure A.
4-1
A A
At least 15 cm
A A
A A
4-2
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
4-1.
Adjust the position of A so that the left and
right ends of A will project beyond D and E
equally (as seen from the front).
4-2.
Secure A by tightening six thick screws (6 ×
20 mm) from the front.
5.
Connect the pedal cord and AC
adaptor.
5-1 5-1
5-5
5-1.
Insert the plug of the pedal cord into the
pedal connector.
Insert the pedal cord securely
until the metal part of the
cord plug disappears from
view. Otherwise, the pedal
may not function properly.
5-2.
Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
5-3.
Use a vinyl tie to take up any slack in the
pedal cord.
5-4.
Connect one end of the power cord to the
AC adaptor.
5-5.
Insert the DC plug of the AC adaptor into
the DC IN jack.
Assembling the Clavinova
5-3
5-2
121