Table of Contents
Advertisement
Recording Your Performance
Recording Target
Song
xxxxx (MIDI Song
selected in step 2-1
above)**
* Can be selected only when the USB flash drive is connected to the USB [TO DEVICE]
terminal.
** Will not be shown when an already recorded MIDI Song is not selected in step 2-1 above,
or when a Preset Song is selected in step 2-1.
3.
Execute the Recording operation, then save the recorded
performance.
• When you want to record additionally to the currently
selected MIDI Song, or record to a specified track on a
blank MIDI Song:
Execute steps 2 – 8 in "MIDI Recording—Independent Tracks" on
page 57.
• When you want to quick record to a blank MIDI Song:
Execute steps 3 – 6 in "Quick MIDI Recording" on page 55.
Audio Recording to the USB Flash Drive
Audio
These instructions describe how to record your performance as audio data.
Note that an audio file to which your performance is to be recorded can be
saved only to a USB flash drive. This is why you should prepare your USB flash
drive device before starting the Recording operation.
1.
Connect the USB flash drive to the USB [TO DEVICE]
terminal.
2.
Press and hold the [REC] (Record) button for a second to
call up the display which lists the Recording Target Songs.
3.
Use the [
u
press the [>] button.
4.
Execute steps 3 – 6 in "Quick MIDI Recording" (page 55).
Unlike with MIDI Recording, the elapsed time is shown on the display
while Audio Recording is being executed.
60
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
Select this when you want to record additionally to/overwrite
the currently selected MIDI Song.
]/[
] buttons to select "New Audio (USB)" then
d
Description
NOTICE
Note that recording your
performance to a Track
containing data will overwrite
the previously recorded data.
NOTE
The time signature and tempo
cannot be changed when
replacing the part of an
existing MIDI Song.
NOTE
To connect a USB flash drive,
be sure to read the section
"Connecting USB Devices
(USB [TO DEVICE] terminal)"
on page 74.
NOTE
Before starting the Recording
operation, check the remaining
memory capacity of the USB
flash drive. "System" menu:
"Utility" "USB Properties"
(page 100).
NOTE
With Audio recording, distorted
sound may be produced if the
Voice Volume is set to the value
higher than the default setting.
Make sure to set the Voice
Volume to the default value or
less before recording from the
"Voice" menu display: "Voice
Edit" "Volume" (page 88).
NOTE
With Audio recording, audio
signals such as those from the
[AUX IN] jack are also
recorded.
Advertisement
Table of Contents
