Load Individual Key Tuning; Quantize Song Data - Yamaha Clavinova CVP-83S Owner's Manual

46
Utility Mode 2
u5
This function reloads the individual key tuning data saved to disk by the Save Individual Key Tuning function (u4),
described above.
Z
X
u6
This function "quantizes" song memory data that has already been recorded to disk. This means that all notes are
aligned to the nearest specified beat, thereby "tightening up" the overall timing.
Z
X
C
SONG NUMBER
32
V
B
n Y
TEMPO
Make sure that the disk containing the saved tuning data is loaded in the Clavinova
disk drive and select the song number you want to load the data from.
Select the "u5" function as described in the introduction to this section, then, while
still holding the [MIDI/TRANSPOSE] button, press the TEMPO [ ] or [ ] button to
begin loading the tuning data. Simply release the [MIDI/TRANSPOSE] button before
pressing the TEMPO [ ] or [ ] button if you want to cancel the function.
The Load Individual Key Tuning function will automatically be exited when the data
has been loaded. The Individual Key Tuning function (U3) will then be automatically
engaged with the loaded tuning, unless the loaded data is the same as that currently in the
Clavinova.
Make sure that the disk containing the song you want to quantize is loaded in the
Clavinova disk drive, and that the song to be quantized is selected.
Select the "u6" function as described in the introduction to this section.
While still holding the [MIDI/TRANSPOSE] button, use the SONG NUMBER [ ]
and [ ] buttons to select the desired quantize value, as shown on the SONG NUMBER
display:
oFF
32
16
8
24
12
6
Still holding the [MIDI/TRANSPOSE] button, use the [RIGHT/1TR], [LEFT/2TR],
or [ORCH/3-10TR] and [ ]/[ ] buttons to select the track you want to quantize.
Still holding the [MIDI/TRANSPOSE] button, press the TEMPO [ ] button to begin
quantization or the [ ] button to cancel.
matically be exited when the data has been quantized.
The Quantize Song Data function will auto-