The Chord Sequence Function; Punch-In Chord Sequence Recording - Yamaha Clavinova CVP-83S Owner's Manual

The CHORD SEQUENCE function provides a convenient way to enter chord sequences and style changes one at a time.
Z
CHORD SEQUENCE
X
q w
?
C
CHORD SEQUENCE
Press the [CHORD SEQUENCE] button. The [ORCH/3-10TR] and
[RHYTHM] track button indicators will glow red, and the ABC FINGERED
mode will be automatically selected — switch to the SINGLE FINGER mode if
you prefer. If the SINGLE FINGER mode was already selected it will remain
engaged.
Make the required style changes (style number, normal/variation, fill-in, intro/
ending, and tempo, as necessary), play and hold a chord on the left-hand section of
the keyboard, and press the [q] key (look for the "q" symbol above the B6 key) or
the [w] key (C7) to enter the chord for a quarter note or whole note, respectively.
You can move one beat backward by pressing the [?] key (A6).
Continue entering chords in this manner until your sequence is complete.
BEAT
12
When all the required chords and style changes have been entered, press the
[CHORD SEQUENCE] button to stop recording.
You can begin chord sequence recording from any point within a previously-
recorded song by pausing playback at the point you want to begin chord se-
quence recording, engaging the Chord Sequence function at that point, and en-
tering the chords up to the end of the sequence as described above.
Performance Memory
37