Basic Procedure - Yamaha Clavinova CLP-611 Owner's Manual

Basic Procedure

This section explains the procedure for viewing and changing the function settings.
1 5
MASTER VOLUME
FUNCTION TRANSPOSE SPLIT
MAX
BRILLIANCE REVERB
MIN
Procedure
Enter FUNCTION mode.
1
Press [FUNCTION].
The FUNCTION indicator lights up.
Select the main function.
2
Select the main function
using the [t] and [s]
buttons directly to the right
of the [FUNCTION]
button. (The arrow markings
are printed under the but-
tons.) Main functions run
from F1 to F15 (on the
CLP-811) or F14 (on the CLP-611).
Change the setting or select the subfunction using the
3
[-/NO] and [+/YES] buttons.
If there are no subfunctions: Pressing the button changes the value.
If there are subfunctions: Press [+/YES] to move to a subfunction.
Proceed using the following three sets of buttons.
4
Use the [t] and [s] buttons to cycle through subfunctions and main
functions.
Use the [-/NO] and [+/YES] buttons to set the value for the item
marked by the blinking cursor on the screen. Press both buttons at the
same time to return the value to its factory default.
If you are working at a screen with multiple settings, use SONG
SELECT [ ], [ ] to select the item you want to set. The selected
item will blink on the screen. (This operation is effective only with
screens that present more than one value.)
To terminate FUNCTION mode...
5
Press the [FUNCTION] button.
The FUNCTION indicator goes off, and the screen return to the
previous display.
Configuration Functions (FUNCTION mode)
26
CLP-811/611
2 4
PIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2
PIPE ORGAN
ORGAN
EFFECT TOUCH VIBES STRINGS CHOIR COMBINATION
HARPSI-
CHORD VARIATION
TRANSPOSE SPLIT
MELLOW ROOM CHORUS HARD
NORMAL HALL 1 SYMPHONIC MEDIUM
BRIGHT HALL 2 TREMOLO SOFT
BASS
STAGE ECHO FIXED
BRILLIANCE REVERB EFFECT TOUCH
Function number
Function name
ROOM
NORMAL MEDIUM
BRILLIANCE REVERB EFFECT TOUCH
3 4 4
DEMO/
METRONOME PIANO SONG
SONG
MEASURE
SONG
TEMPO
TEMPO SELECT
– +
/ NO / YES
It is not possible to enter
FUNCTION mode directly from
DEMO/PIANO SONG mode or
RECORDING or playback is in
progress.
TEMPO
RECORDER
1 2
START/
STOP REC