Split Mode (Dividing The Keyboard) - Yamaha Clavinova CLP-611 Owner's Manual

You can use function F4 to
make various settings related to
dual play — see page 29 for
details.
If you select [STRINGS] as
one of the voices, you can use
function F4 to select a slower
string attack.
Terminating DUAL
2
mode...
Pressing any one of the voice
selectors will select the corre-
sponding voice and return you
to normal mode.

SPLIT Mode (Dividing the keyboard)

This feature allows you to divide the keyboard into left and right zones. You can select the split point,
and assign a different voice to each zone.
MASTER VOLUME
FUNCTION TRANSPOSE SPLIT
MAX
BRILLIANCE REVERB
MIN
Procedure
Enter SPLIT mode.
1
Press [SPLIT].
The SPLIT indicator
lights up.
The Clavinova
automatically
selects the default
voice (BASS if CLP-811; STRINGS if CLP-611) for the left zone.
You can use function F5 to make various settings related to split play —
see page 29 for details.
Select the split point.
2
Hold down [SPLIT] and hit
the key at which you want
to split the keyboard. If you
omit this operation, the
Clavinova automatically
sets the split point to F 2.
18 Selecting and Playing Voices
CLP-811/611
[SPLIT]
Voice selector
PIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2
PIPE ORGAN
EFFECT TOUCH VIBES STRINGS CHOIR ORGAN COMBINATION
NORMAL
BRILLIANCE
Handling of effects
If both voices are set to their standard effects at the time you enter DUAL mode, the
Clavinova will automatically select the effect and depth to be applied for the combination. In
all other cases, the Clavinova will set the effect as follows.
[Type]
a) If both voices are set to the same effect...
Each voice retains its original effect.
b) If effect for one voice only is OFF...
Each voice retains its original effect settings. One voice receives no effect; the other
receives the effect set up prior to entry into DUAL mode.
c) If the two voices are set to different effects ...
The effect setting for Voice # 1 is used for both voices. The effect setting for Voice
forced off until DUAL mode terminates.
d) If you change the EFFECT type while DUAL mode is in progress, the Clavinova will
apply the newly selected effect to both voices.
[Depth]
You can set the depth to any level using function F4.
HARPSI-
CHORD
VARIATION
TRANSPOSE SPLIT
MELLOW ROOM CHORUS HARD
NORMAL HALL 1 SYMPHONIC MEDIUM
BRIGHT HALL 2 TREMOLO SOFT
BASS
STAGE ECHO FIXED
BRILLIANCE REVERB EFFECT TOUCH
Voice for left zone
SPLIT
ROOM
MEDIUM
TEMPO
REVERB EFFECT TOUCH
Split point
SPLIT
ROOM
NORMAL MEDIUM
BRILLIANCE REVERB EFFECT TOUCH
DEMO/
METRONOME PIANO SONG
SONG
MEASURE
SONG
TEMPO
TEMPO SELECT
– +
/ NO / YES
SPLIT or DUAL...
Voice for right zone
It is not possible to use the DUAL
and SPLIT features at the same
time.
The "split point" is the highest
note in the left zone.
Handling of VARIATION
You can select VARIATION
independently for each of the two
voices. During SPLIT mode, the
VARIATION lamp and voice
indicator show the status of the
right-zone voice only.
While you are holding the
[SPLIT] button down, however,
the lamps change to show the
status for the left-zone voice.
You can also use function F5 to
set the split point (see page 29).
TEMPO
# 2 is
RECORDER
1 2
START/
STOP REC