With Macintosh
7. Press BR-900CD's [EXIT] repeatedly to return to the
Play screen.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear. In this case, pressing
[ENTER] and then [EXIT] returns the Play screen to the
display.
fig.06-106ad
At this point, you can safely disconnect the USB cable
from the BR-900CD and the computer.
8. Press [UTILITY].
9. Press CURSOR [
] [
"TONE," and press [ENTER].
fig.03-515d
10. Press CURSOR [
] [
"CARD," and press [ENTER].
The names of the WAV and AIFF files on the memory
card are displayed.
* WAV files are indicated by the symbol ".W"; ".A" indicates
AIFF files.
fig.03-516d
11. Turn the TIME/VALUE dial to select the WAV or AIFF
file with the drum sound to be loaded.
182
] to move the cursor to
] to move the cursor to
You can preview the sound of the WAV or AIFF file to be
loaded by moving the cursor to "PVW" and pressing
[ENTER].
12. Turn the TIME/VALUE dial to specify the load-
destination song drum kit.
S1–5:
Song Drum Kit 1–5
fig.03-517d
13. Turn the TIME/VALUE dial to select the load-
destination song drum sound, then press [ENTER].
The load is executed.
To cancel, press [EXIT].
fig.03-518d
* During updating, "Keep power on!" appears in the upper line
of the display, while the lower line shows what is being
processed.
* WAV and AIFF files in the TONELOAD folder are retained
without being deleted even after this procedure is completed. If
these files are no longer needed, connect the BR-900CD to
your computer via USB and use the computer to delete the
files. Any files that are retained will use the required amount
of memory on the memory card.