Table of Contents
Advertisement
4. Use [CURSOR] and the TIME/VALUE dial to set the
measure, beat, and click from which to start recording
of the pattern.
Measure
This sets the number of measures in the pattern to be
recorded.
Valid Settings: 1–999
Tempo
When recording, this sets the tempo for confirming the
pattern.
Valid Settings: 25.0–250.0
* The tempo setting here is exclusively for confirmation of the
pattern recording. This tempo is not stored in the pattern (you
cannot make any individual tempo settings for the patterns
themselves).
Time Signature
This sets the time signature (i.e., the beat) for the pattern
to be recorded.
Valid Settings: 1/1–8/1, 1/2–8/2, 1/4–8/4, 1/8–8/8
Quantize
This sets the recording quantization.
Setting Quantize lets you to have the sounds being input
conform to preset note lengths, thus eliminating
discrepancies in the input timing.
* Press "HI" you want to keep the timing used to input the
sounds.
Valid Settings:
Quarter note
Quarter-note triplet
Eighth note
Eighth-note triplet
Sixteenth note
5. Press CURSOR [
] [
and press [ENTER].
The count-in is played, and then Realtime Recording
starts.
* You can also start Realtime Recording by pressing the [REC]
button.
6. Set the velocity (how "hard" the note is played) for the
sounds to be input from the current point by adjusting
Fader 1.
Sixteenth-note triplet
Thirty-second note
Thirty-second-note triplet
HI
] to move the cursor to "REC,"
Creating Original Patterns
The current velocity value is briefly indicated where the
beat value normally appears.
fig.03-404d
Velocity
7. Input the drum sounds with the desired timing.
Use REC TRACK [1]–[6] to input the drum sounds.
You can switch the UPPER and LOWER drum sounds by
pressing [RHYTHM PAD].
[RHYTHM PAD] Lit
Enables input of the UPPER drum sounds.
REC TRACK [1]
REC TRACK [2]
REC TRACK [3]
REC TRACK [4]
REC TRACK [5]
REC TRACK [6]
[RHYTHM PAD] Flashing
Enables input of the LOWER drum sounds.
REC TRACK [1]
REC TRACK [2]
REC TRACK [3]
REC TRACK [4]
REC TRACK [5]
REC TRACK [6]
You can confirm the drum sound currently being input
by checking the matrix at the bottom part of the display.
Indicated in the matrix
You can confirm the timing at which each rhythm
instrument sounds in the matrix display.
The ▼ mark in the lower part of the matrix indicates beat
timing.
KICK
SNARE
CLOSED HIHAT
OPEN HIHAT
CRASH CYMBAL
RIDE CYMBAL
CROSS STICK
COWBELL
TOM1
TOM2
TOM3
TOM4
127
Advertisement
Table of Contents
