Table of Contents
Advertisement
Insert Effect Parameter Functions
Speaker Simulator
This simulates the characteristics of various types of speakers. When
the output of the BR-900CD is connected directly to a mixer, etc., this
can be used to create the sound of your favorite speakers system.
On/Off
This parameter turns the speaker simulator effect on/off.
Type
Selects the type of speaker that will be simulated.
* "On Mic" simulates the sound when a dynamic microphone is used,
and "Off Mic" simulates the sound when a condenser microphone is
used.
■ With "COSM GTR AMP," "COSM COMP GTR,"
or "VO+GT AMP" algorithms
fig.04-128
SP Simulator
Speaker
Cabinet
Type
SMALL
Small open-back enclosure
10 inch
MIDDLE
Open-back enclosure
12 inch
JC-120
Open-back enclosure
12 inch (two units)
Open-back enclosure
12 inch (two units)
TWIN
twin
Open-back enclosure
12 inch (two units)
MATCH
Open-back enclosure
12 inch (two units)
match
Open-back enclosure
12 inch (two units)
VO DRV
Open-back enclosure
12 inch (two units)
Open-back enclosure
12 inch (two units)
vo drv
Large Sealed enclosure
12 inch (two units)
BG STK
Large sealed enclosure
12 inch (two units)
bg stk
Large sealed enclosure
12 inch (four units)
MS STK
Large sealed enclosure
12 inch (four units)
ms stk
Large dual stack
12 inch (four units)
METAL
■ With "COSM BASS AMP" or "COSM COMP
BSS" algorithms
fig.04-129
SP Simulator
Speaker
Cabinet
Type
Large sealed enclosure
15 inch (two units)
AC
Large sealed enclosure
15 inch (two units)
ac
Large sealed enclosure
10 inch (eight units)
AMG
amg
Large sealed enclosure 10 inch (eight units)
Mic Set
This simulates the microphone position. "CENTER" simulates the
condition that the microphone is set in the middle of the speaker
cone. "1–10 cm" means that the microphone is moved away from the
center of the speaker cone.
Mic Level
Adjusts the volume of the microphone.
Dir Level
Adjust the volume of the direct sound.
100
OFF, ON
Microphone
Comments
Unit
Setting
On Mic
On Mic
On Mic
Roland JC-120 Simulation
On Mic
A setting suitable for CLEAN
Off Mic
A setting suitable for CLEAN
On Mic
A setting suitable for MATCH
Off Mic
A setting suitable for MATCH
On Mic
A setting suitable for VO DRV
Off Mic
A setting suitable for VO DRV
OnMic
A setting suitable for BG LEAD
Off Mic
A setting suitable for BG LEAD
On Mic
A setting suitable for MS
Off Mic
A setting suitable for MS
Off Mic
Microphone
Comments
Unit
Setting
On Mic
A setting suitable for AC
Off Mic
A setting suitable for AC
On Mic
A setting suitable for AMG
Off Mic
A setting suitable for AMG
CENTER, 1–10 cm
0–100
0–100
Tremolo/Pan
Tremolo is an effect that creates a cyclic change in volume. Pan
cyclically moves the stereo position between left and right (when
stereo output is used).
* This effect can be used when the MODULATION "Type" parameter
is set to "TRM/PAN."
On/Off
This parameter turns the tremolo/pan effect on/off.
Mode
Selects tremolo or pan; also selects how the effect is applied
TRM-TRI:
The volume will change cyclically. Smooth change will be produced.
TRM-SQR:
The volume will change cyclically. Abrupt change will be produced.
PAN-TRI:
The sound will be moved cyclically between left and right. Smooth
change will be produced.
PAN-SQR:
The sound will be moved cyclically between left and right. Abrupt
change will be produced.
* "PAN-TRI" and "PAN-SQR" are obtained with stereo recording
(using two tracks).
Rate
Adjust the rate at which the effect will operate.
Depth
Adjusts the depth of the effect.
Voice Transformer
This controls the formants, allowing a variety of voice characters to
be created. This adds two voice characters with differing formants to
the direct sound.
On/Off
This parameter turns the voice transformer effect on/off.
Formant1
Adjust the formant of the voice character 1.
Formant2
Adjust the formant of the voice character 2.
FX1 Level
Adjust the volume of the voice character 1.
FX2 Level
Adjust the volume of the voice character 2.
Dir Level
Adjust the volume of the direct sound.
OFF, ON
0–100
0–100
OFF, ON
-100– +100
-100– +100
0–100
0–100
0–100
Advertisement
Table of Contents
