Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha VMX EAU10041 Owner's Manual

WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
EWA10790
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
ECA10660
1. Screw
1. Tail/brake light bulb
EAU24281
1. Turn signal light bulb
2. Remove the defective bulb by
3. Insert a new bulb into the socket,
4. Install the lens by installing the
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
6-35
pushing it in and turning it counter-
clockwise.
push it in, and then turn it clock-
wise until it stops.
screws.
6
ECA10680