Rider Seat - Yamaha VMX EAU10041 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Rider seat

To remove the rider seat
1. Release the rider seat backrest by
pushing the levers on the left and
right side as shown, and then slide
the backrest forward.
3
1. Opening lever
2. Remove the bolts and screws, and
then pull the rider seat off.
EAU14230
1. Bolt
2. Screw
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown.
1. Projection
2. Seat holder
2. Place the rider seat in the original
NOTE:
Make sure that the seat is properly se-
cured before riding.
3. Return the rider seat backrest to
3-9
position, and then tighten the bolts
and screws.
the original position.