Removing And Installing The Cowling And Panels - Yamaha VMX EAU10041 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Removing and installing the
cowling and panels
The cowling and panels shown need to
be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each time
the cowling or a panel needs to be re-
moved and installed.
6
1. Cowling A
2. Panel A
3. Panel B
Cowling A
To remove the cowling
1. Insert the key into the lock, and
then turn it clockwise.
EAU18721
1. Unlock.
2. Pull the cowling off as shown.
To install the cowling
1. Align the holders under the cowl-
ing with the projections on the
frame.
EAU19120
1. Holder
2. Projection
2. Push down on the rear of the cowl-
3. Remove the key from the lock.
Panel A
To remove the panel
1. Remove cowling A. (See page
2. Remove the screws, and then take
1. Screw
To install the panel
1. Place the panel in the original posi-
2. Install the cowling.
6-8
ing until it locks in place.
6-8.)
the panel off.
tion, and then install the screws.
EAU19180