Setting The Chorus Return Level - Yamaha yahama PSR - 520 Owner's Manual

3
Exit
.........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.
The chorus return level determines the amount of "wet" (affected) signals output to the amplifier.
1
Select the Chorus Return Level Function
Press the [FUNCTION] button to the left of the display as many times
as necessary until the arrowhead in the display appears next to "DIGITAL
EFFECT" in the function list to the left of the display, and use the cursor
[ ] and [ ] buttons to select the Chorus Return Level function.
2
Set the Chorus Return Level
Use the [–/NO] and [+/YES] buttons, the number buttons or the data dial
to set the desired chorus return level. The range is from "00" to "127".
3
Exit
.........................................................................................................................................................................................
Press the [VOICE] button or select a different function to exit from the
DIGITAL EFFECT function.

Setting the Chorus Return Level

164
...............................................................................................
.................................................
• See page 78 for more details on
• The chorus return level desig-
• The default chorus return level =
Digital Effects
the Digital Effects.
nated here affects the entire
setting, while the chorus send
level can be applied to the voice
selected via the VOICE function,
the split voice and the dual voice
separately via the "ChoLevel" in
the OVERALL function group, the
"S.ChoLvl" in the SPLIT VOICE
function and the "D.ChoLvl" in
the DUAL VOICE function (see
pages 68, 16 and 19).
64 can be recalled instantly by
pressing both the [–/NO] and [+/
YES] buttons simultaneously.
27