Yamaha S70 XS Owner's Manual page 51

Auto Sync window
This window is used for changing the status of the Editor from "OFFLINE" to "ONLINE." While editing a parameter
on the Editor affects the same parameter on the S90 XS/S70 XS instrument and vice versa in the Online status, you
can disable the "mirroring" of parameter changes between the devices by switching to Offline status. The Auto
Sync window can be called up by clicking "OFFLINE" on the Editor window when the Editor is in the Offline status.
The Auto Sync window can also be called up automatically (without clicking "OFFLINE") under the following
circumstances:
• When opening a file.
• When creating a new file by selecting "New" under the File menu.
• When changing the mode on the Editor in the Online status of the Editor.
• When changing the mode on the S90 XS/S70 XS instrument in the Online status of the Editor.
• When the connection between the S90 XS/S70 XS and a computer are corrected after appropriately correcting
the setup of the S90 XS/S70 XS and the computer.
• When the settings on the S90 XS/S70 XS instrument and the computer are corrected after appropriately
reconnecting the devices.
n
If the Auto Start parameter is set to "On" in the Auto Sync window, data synchronization may be started automatically as
soon as the Auto Sync window is opened in certain conditions. For details, see
On the Auto Sync window, set the Data Port properly then click [Start] button to execute data synchronization. As
soon as the data synchronization is completed, the Auto Sync window is closed then the OFFLINE indication
changes to ONLINE automatically.
1
1 [X] (Close) button
Click this to close this window without executing data synchronization.
2 [Detail] button
3 Port
4 Device No.
5 Auto Sync Setting
These parameters are same as in the Setup window. See
6 Progress Bar
7 [Start] button
8 [Stop] button
These parameters are same as in the Data Sync window. See
S90 XS/S70 XS Editor Owner's Manual
2
5
6
7
page 40.
3
4
8
page 39.
page 50.
Menu
51