Changing The In-Skin Router Between Different Config Modes; From Operation Mode To Login Authentication (Logout) - NEC NEAX IPS NWA-008869-001 Installation Manual

Changing the In-Skin Router between different config modes

From global config mode to interface or device config mode
To change the In-Skin Router from global config mode to interface or device config mode, specify the in-
terface or device that you want to set up.
Router (config) # interface Ethernet0.0
Router (config − Ethernet0.0) #
From interface or device config mode to global config mode
To change the In-Skin Router from interface or device config mode to global config mode, use the exit
command.
Router (config − Ethernet0.0) # exit
Router (config) #

From operation mode to login authentication (logout)

To log out, use the exit command.
Router # exit
Enter
login :
CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS
Enter
Enter
– 80 –
MODES
NWA-008869-001 Rev.1.0
atch3001.fm