Effect Structure - Yamaha PORTATONE PSR-1000 Owner's Manual

Adjust the Volume Balance and Changing Voices — Mixing Console

Effect Structure

The PSR-2000/1000 features the following digital effect systems. The effect type, depth, and various parameters can be
set with the panel controls.
About the Effect Connections – System and Insertion
All the effect blocks are connected or routed in one of two ways: System or Insertion. System applies the selected effect
to all parts, while Insertion applies the selected effect to one specific part. Reverb and Chorus are System effects, and
DSP 2 - DSP 4 (PSR-2000 only) are Insertion effects. The DSP1/DSP effect, on the other hand, can be configured for
either System or Insertion routing.
The illustration below shows how the various effect blocks are set up and traces the signal flow for the send/return
controls set on the PSR-2000/1000.
PSR-2000
Unused DSP blocks are automatically
assigned to the active parts.
MAIN VOICE
LAYER VOICE
LEFT VOICE
MIC
MIC
Effect
SONG
(each channel)
STYLE
(each channel)
When DSP is set as an Insertion effect
(here PART is set to one of the STYLE channels),
it is put here in the signal flow.
PSR-1000
MAIN VOICE
When DSP is set as an Insertion effect
(here PART is set to MAIN),
it is put here in the signal flow.
LAYER VOICE
LEFT VOICE
MIC
STYLE/SONG
(each channel)
126
PSR-2000/1000
Dry
DSP2
Rev Send
Cho Send
DSP Send
Dry
DSP3
Rev Send
Cho Send
Dry
DSP4
Rev Send
Cho Send
Dry
Vocal
Rev Send
Harmony
Cho Send
DSP Send
Dry
Rev Send
Cho Send
DSP Send
Dry
DSP1
Rev Send
Cho Send
DSP Send
Dry
DSP
Rev Send
Cho Send
DSP Send
Dry
Rev Send
Cho Send
DSP Send
Dry
Rev Send
Cho Send
DSP Send
Dry
Rev Send
Cho Send
DSP Send
Dry
Rev Send
Cho Send
DSP Send
DRY LINE
REVERB
Reverb Return
CHORUS
Chorus Return
When DSP is set as a System effect,
it is put here in the signal flow.
DSP1
DSP Return
DRY LINE
REVERB
Reverb Return
CHORUS
Chorus Return
When DSP is set as a System effect,
it is put here in the signal flow.
DSP
DSP Return
Master EQ OUT
OUT