Effect Block - Yamaha PORTATONE PSR-1000 Owner's Manual

3
A
B
C
D
E
Switches between
the upper/lower
parameters. For the
lower parameter,
the depth can be
changed when the
[VARIATION]
button is on.
1
Determines the

effect block.

Determines the effect category.
Determines the effect type.
4
Select the
destination to
which the effect
is to be stored.
The number of
memory spaces
available for the
destination differs
for each block
1
(refer to the chart
below).
Effect Block
Block Parts
REVERB
All parts
CHORUS
All parts
DSP 1 (PSR-2000)
Main, Layer, Left, Song (Ch. 1 - 16),
DSP(PSR-1000)
MIC (PSR-2000 only), Style
DSP2 - 4 (PSR-2000 only) Main, Layer, Left, Song (Ch. 1 - 16),
MIC (automatically assigned)
Adjust the Volume Balance and Changing Voices — Mixing Console
2 3 4 5 6 7
Determines the effect parameter to be adjusted.
2 3 4 5 6 7
Calls up the
display for storing
F
the effect.
G
H
I
J
Determines the level of the
effect (return level). This is not
available when BLOCK is set
to "DSP1/DSP," PARAMETER
is set to "CONNECTION," and
VALUE is set to "Insertion" or
when BLOCK is set to "DSP2–
4" (PSR-2000).
8
Determines the value of the
selected parameter.
Calls up the display
for naming the User
F
Effect (page 45).
G
H
I
J
Stores the effect settings you
made above to a User Effect
location (SYSTEM) for future
recall. To call up the effect, select
USER from the CATEGORY
parameter and select the desired
effect from the TYPE parameter.
8
Characteristics
Reproduces the warm ambience of playing in
a concert hall or jazz club.
Produces a rich "fat" sound as if several parts
are being played simultaneously.
In addition to reverb and chorus effects, this
section features a variety of special effects,
including distortion.
Any unused DSP blocks are automatically
assigned to the remaining active parts.
Keep in mind that in some
cases noise may result if
you adjust the effect param-
eters while playing the
instrument.
Number of User Effect
3
3
3
10
PSR-2000/1000
125