Ir Board - Epson EB-E01 Service Manual

EB-E01 series

3.3.16.1 IR Board

DISASSEMBLY PROCEDURE
 EB-E01/X06/W06/FH06/E10/X51/W51/W52/E20/X49/W49/118,
PL 119W, EH-TW740/TW750
1. See Flowchart (p70) and remove all parts up to the component below from
the projector.
INT Duct (Assy) (p129)
2. Remove the screw ( ) and remove the "IR Board" and the "RCF Cable".
Route the "RCF Cable" connected to the "IR Board" on
the INT Duct as shown in the figure below.
SEIKO EPSON
Disassembly and Assembly
After routing the cable, wind the
fan cable.
131
INTERNAL USE ONLY
INT Duct (Assy)
RCF Cable
C.B.P-TITE SCREW,2.5X10,F/ZN-3C
IR Board
Revision A