Connections; Connectors - Yamaha Clavinova CLP-100 Owner's Manual

Yamaha musical instrument owner's manual
Hide thumbs Also See for Clavinova CLP-100:
Table of Contents

Advertisement

Connections

Connectors

CAUTION
Before connecting the Clavinova to other electronic components, turn off the power to all the components. Before turn-
ing the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to
the components may result.
Show the jacks as seen when
viewed from below the instrument.
CLP-370/340 only
CLP-S308/S306
Left
1 AUX OUT [L/L+R][R] jacks
You can connect these jacks to a Keyboard amplifier system to monitor your play-
ing. Refer to the diagram below and use cables to make the connections. The Mas-
ter volume affects the AUX OUT signal. If you want to turn off the sound of the
internal speakers, use the speaker switch (page 15).
CAUTION
When the Clavinova's AUX OUT jacks are connected to an external audio system, first turn on the
power to the Clavinova, then to the external audio system. Reverse this order when you turn the
power off.
Clavinova
AUX OUT
R
The sound via the internal speakers and headphones is set to the proper condition automatically (see below).
No plugs to connected to AUX OUT jacks
Speakers On
Headphones
Optimum equalization for
connected
speakers applied
Headphones
Optimum equalization for
not connected
speakers applied
CLP-370/340/330
2
5
1
4
6
3
CLP-370/340 only
4
5
Keyboard amplifier
L/L+R
AUX OUT
AUX IN
Phone plug
Phone plug
Cable
Speakers Normal
Speakers Off
(Headphones Switch)
Flat
Optimum equalization for
speakers applied
On the left of the panel
SELECT
USB TO DEVICE
3
2
1
Plugs connected to AUX OUT jacks
Speakers On
Flat
Flat
Flat
Flat
CLP-370/340/330, CLP-S308/S306 Owner's Manual
Connections
CLP-370/340 only
Right
6
NOTE
Use cables and plugs with no
resistance.
NOTE
Do not input the sound from the
AUX OUT jacks to the AUX IN
jacks. This may cause a feedback
loop, and the output sound may
be excessively loud.
NOTE
If you want to take a mono signal
via the AUX OUT jack, connect a
cable to the [L/L+R] jack.
Speakers sound
Speakers do not sound
Speakers Normal
Speakers Off
(Headphones Switch)
Flat
Flat
Flat
Flat
71

Advertisement

Table of Contents
loading

Table of Contents