Adding Variations To The Sound - [Variation] (Clp-370/340)/[Brilliance]/[Reverb]/ [Effect]/[Damper Res.] - Yamaha Clavinova CLP-100 Owner's Manual

Selecting & Playing Voices
Adding Variations to the Sound — [VARIATION]
(CLP-370/340)/[BRILLIANCE]/[REVERB]/[EFFECT]/
[DAMPER RES.]
[VARIATION] (CLP-370/340)
Lets you alter another aspect of the effect, depending on the selected type.
Refer to "Preset Voice List" on page 92 for more information on the characteristics of
each variation.
Procedure
Pressing the
[VARIATION]
The indicator lights (ON) when
[BRILLIANCE]
This control can be used to change the tonality or "timbre" of the sound output.
Bright tone
BRIGHT:
Standard tone
NORMAL:
Soft and mellow tone
MELLOW:
Procedure
To select a brilliance type, press the
tor corresponding to the desired type lights (the indicator lights in sequence each time
you press the
[BRILLIANCE]
two adjacent indicators are lit, the type that is between the two indicated types is
selected. For example, when both NORMAL and MELLOW are lit, the brilliance set-
ting between NORMAL and MELLOW is selected. This parameter affects the entire
sound of the instrument.
[REVERB]
This control enables you to select various digital reverb effects that would add extra
depth and expression to the sound to create a realistic acoustic ambience.
OFF: When no reverb effect is selected, no REVERB indicator is lit.
This setting adds a continuous reverb effect to the sound, similar to the
ROOM:
acoustic reverberation you would hear in a room.
For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates
HALL 1:
the natural reverberation of a small-size concert hall.
For a truly spacious reverb sound, use the HALL 2 setting. This effect simu-
HALL 2:
lates the natural reverberation of a large concert hall.
Simulates the reverb of a stage environment.
STAGE:
22
CLP-370/340/330, CLP-S308/S306 Owner's Manual
or selected voice button toggles the variation on and off.
[VARIATION] is enabled.
button a few times until the indica-
[BRILLIANCE]
button). Brilliance can be selected among five types. When
[–/NO] [+/YES]
[VARIATION] button
buttons
[BRILLIANCE]
button
[DAMPER RES.]
button
[REVERB]
button
-370
CLP
[EFFECT]
button
NOTE
Normal setting = OFF
TERMINOLOGY
Normal setting:
The "Normal setting" refers to the
default setting (factory setting)
obtained when you first turn on
the power to the Clavinova.
NOTE
The left pedal can be assigned to
ON or OFF the variation via the
"Left Pedal Mode" function
described on page 66.
NOTE
Normal setting = NORMAL
NOTE
When the BRILLIANCE is set to
BRIGHT, the overall sound will be
slightly louder. If the MASTER
VOLUME is set at a high level the
sound may become distorted. If
so, lower the MASTER VOLUME
level.
NOTE
The default reverb type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
Releasing the [REVERB] button
changes the reverb type.
If you have changed the reverb
depth, releasing the [REVERB]
button will not change the reverb
type.