Initializing Internet Settings - Yamaha Clavinova CLP-100 Owner's Manual

Initializing Internet Settings

You can initialize the Internet settings.
Engage the function mode, then select the function number and enter the desired Sub-
modes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
Procedure
1. Select Function F9.7 (on the CLP-370/340) or F8.7 (on the CLP-
S308/S306).
[TEMPO/FUNCTION ▼, ▲]
Use the
370/340) or F8.7 (CLP-S308/S306).
2. Enter the Initializing mode.
Press the
[+/YES]
A "CLr" message will appear on the display.
3. Confirm the initialization.
Press the
[+/YES]
A "n y" appears in the display to confirm whether you wish to initialize or
not.
If you do not want to initialize, press the
4. Execute the initialization.
Press again the [+/YES]
Start the initialization.
When initialization is completed, an "End" message appears on the display.
5. Return to the Sub-modes Selection mode
Press the
[+/YES]
6. Exit from function mode
Press the
[TEMPO/FUNCTION]
CAUTION
Initializing restores the instrument to the factory-programmed settings for all Internet
settings. Yamaha recommends you that you back up the Internet settings before initial-
izing.
Internet Initial Settings List
The following are the default settings of this instrument.
DHCP ON (available)
Wireless LAN OFF (no settings)
Proxy server OFF (no settings)
buttons to select Function F9.7 (CLP-
buttons.
button.
[–/NO]
buttons.
button to exit from the Sub-modes.
button to exit from the Function modes.
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
button.
CLP-370/340/330, CLP-S308/S306 Owner's Manual
NOTE
The settings of the Internet are not
initialized when using the "Initial-
izing the data" on page 58.
NOTE
Information of the cookies will be
initialized at the same time.
55