Load - Yamaha RX21 Product Manual

the CASSETTE button. The LCD will read "SAVE BREAK" or "VERIFY BREAK",
depending on which function you have interrupted. The RX21 will stop for about
2 seconds, then you can return to the cassette mode by pressing CASSETTE again.
The verify function can be accessed directly, without going through the save op-
eration by pressing the VERIFY button.
The cassette control mode is exited by pressing any main function key (pattern
play, beat exchange, real time write, step write, song play, song write, clear, MIDI
control).
Save Data to Cassette and Verify
To load data from a cassette tape into the RX21 memory, first enter the cassette

Load

control mode by pressing the CASSETTE button. When the LCD panel reads
"CASSETTE CONTROL", press the LOAD button. The LCD will respond with "LOAD
SURE?" Make sure that the data cassette is rewound to the beginning of the file
you wish to load, press the +1/YES button then start the cassette player in the
playback mode to begin the load operation. If you do not wish to load, press the
-1/NO key and the LCD will revert to the "CASSETTE CONTROL" display.
While the RX21 is loading the data (about 12 seconds) the display will read "LOAD
EXECUTING". If the load operation is completed and no errors are detected, the
RX21 will return directly to either the song or pattern mode. If a load error is detected
the LCD display will read "LOAD ERROR!" In this case return to the cassette control
mode by pressing the CASSETTE button and carry out the load process again.
If you wish to stop a load operation before the RX21 has completed this function,
press the CASSETTE button. The LCD will read "LOAD BREAK". The RX21 will
stop for about 2 seconds, then you can return to the cassette mode by pressing
CASSETTE again.
The cassette control mode is exited by pressing any main function key (pattern
play, beat exchange, real time write, step write, song play, song write, clear, MIDI
control).
35