Lorex C861CF Series Quick Start Manual

Package Contents
• 4K Ultra HD Motorized Varifocal Bullet Camera
• Mounting Kit*
• BNC / Power Extension Cable*
• Power Adapter* **
/
* Per camera in multi-camera packs.
** Only the included power adapter can be used. Do not use 4-in-1 or
8-in-1 power adapters with the camera.
ATTENTION:
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this
camera (included). Use of a non-regulated, non-conforming power supply can
damage this product and voids the warranty.
Safety Precautions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels noted in the
camera's specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of intense light.
• Make sure you install the camera in a location that can support the camera's
weight.
• Use only the supplied regulated power supply provided with the product. Use of
a non-regulated, non-conforming power supply can damage the product and void
the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,
chemical-based cleaners.
• The supplied cable is rated for surface and in-wall mounting only. Cables for floor-
to-floor installations are sold separately (CMR type). These and other cables are
available at lorex.com.
Cable Extension Options
Extend the cable run for your camera depending on the cable type used.
Additional extension cables sold separately. See table below:
Option Model Number
1
CB120URB1A
2
CB250URB1A
NOTES:
1. The extension cable must be a single stretch of cable between the DVR and
camera. You cannot connect multiple extension cables to each other.
2. Extending camera cable runs beyond the included cable length may require
you to connect the power supply directly to the camera rather than to the
extension cable.
3. Indicators that your cable run may be too long:
• Camera loses video when switching to night vision.
• Video is permanently black & white (even during day time).
• Video is unclear, soft, or distorted.
4. For more information on extension cables, visit lorex.com
model numbers of the cables above.
Resources
Visit us online for up-to-date software
1
Visit lorex.com
Search for the model
2
number of your product
Click on your product
3
in the search results
4
Click on the Downloads tab
Dimensions
3.6" / 90mm
Disclaimers
• For a full list of compatible recorders, visit lorex.com/compatibility.
• To ensure that you are viewing camera video in full 4K resolution (4K monitor
required), check the video output resolution of your recorder. For full instructions,
see your recorder's documentation at lorex.com.
• Not intended for submersion in water. Installation in a sheltered location
Cable Length
recommended.
120ft (37m) • This camera includes an Auto Mechanical IR Cut Filter. When the camera changes
between Day/Night viewing modes, an audible clicking noise may be heard from
250ft (76m)
the camera. This clicking is normal, and indicates that the camera filter is working.
and search for the
Copyright © 2019 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
Need Help?
and complete instruction manuals
9.6" / 244mm
C861CF_QSG_EN_R1
4K Ultra HD Motorized Varifocal
Bullet Camera
Quick Start Guide
English Version 1.0
C861CF SERIES
www.lorex.com