Table of Contents
Advertisement
Quick Links
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
High Resolution Color Day/Night Professional Camera
Advertisement
Table of Contents
Related Manuals for Lorex CVC8010
Summary of Contents for Lorex CVC8010
- Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Features
Features Horizontal Resolution 540 TV High Sensitivity Lines The high sensitivity enables a clear image even in 0.3Lux(0.1Lux B/W) or as low as Clear image quality has been achieved by 0.002Lux with SENS-UP. employing a SONY CCD with 410,000 (effective) pixels, which provides a horizontal resolution of 540 TV lines. -
Page 3: Table Of Contents
Contents Features Warnings and Precautions Components Names and Functions of Parts Front Bottom Back Installation Lens ・Using auto iris ・Using C/CS mount lens Connecting to a monitor Connecting to power High Resolution Color Day/Night Professional Camera Camera Operation Menu Settings •... - Page 4 Precautions Do not install the camera in Do not install or use the camera in an extreme temperature conditions. environment where the humidity is high. Only use the camera under conditions It can cause the image quality to be where temperatures are between poor.
-
Page 5: Components
Components 1. COLOR BOX CAMERA 2. AUTO IRIS LENS CONNECTION PLUG 3. L-WRENCH 4. C-MOUNT ADAPTOR 5. LENS 3.0~8.5mm Auto Iris DC Lens-CS Type 6. MOUNTING BRACKET 7. CABLE 65ft BNC Extension Cable 8. BNC TO RCA ADAPTOR 9. ADAPTOR 12V DC 300mA Regulated Power Supply 10. -
Page 7: Installation
Installation Lens A Varifocal auto iris lens is included with this camera. Lenses such as auto iris lens, CS-Mount lens and C-Mount lens can be used. Note • Use of the DC auto iris lens is recommended to achieve the best results for operating this product effectively. -
Page 8: Connecting To A Monitor
Installation When using a CS-Mount lens Take off the lens protection cap and attach the CS-Mount lens to the camera by screwing it in clockwise. When using a C-Mount lens 1. Take off the lens protection cap and attach the C-mount adaptor. 2. -
Page 9: Camera Operation
Camera Operation Menu SETUP menu LENS (selection) •MANUAL •DC/VIDEO SHUTTER •ESC •MANUAL •FLK (condition and speed control) WHITE BALANCE control •ATW •AWC •MANUAL •OFF •LOW •MIDDLE (Back Light Compensation) •HIGH AGC (Auto Gain control) •OFF •LOW •MIDDLE •HIGH •OFF •LOW •MIDDLE (Digital Noise Reduction) •HIGH... -
Page 10: Lens (Selection)
Camera Operation SETUP Select any function you Modes can be changed LENS MANUAL wish to operate by using the LEFT and SHUTTER using the UP and RIGHT buttons. WHITE BAL. DOWN buttons. BACKLIGHT SENS-UP SPECIAL EXIT 3. Press the LEFT or RIGHT button if you wish to change mode. •... -
Page 11: Shutter (Condition And Speed Control)
Camera Operation SHUTTER (condition and speed control) Auto or manual control can be selected. 1. When the SETUP menu is on the screen, position the cursor to point to 'SHUTTER' by using the UP and DOWN buttons. 2. Select the shutter mode by pressing the LEFT or RIGHT button. FLK : Select 'FLK' mode when flickering occurs on the screen due to an imbalance between illumination and frequency. -
Page 12: Blc (Back Light Compensation)
Camera Operation BLC (Back Light Compensation) When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Position the cursor to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons. -
Page 13: Dnr (Digital Noise Reduction)
Camera Operation DNR (Digital Noise Reduction) The level of background noise in low light decreases automatically as the level of gain changes. 1. Position the cursor to point to 'DNR' on the SETUP menu by using the UP and DOWN buttons. 2. -
Page 14: Special
Camera Operation SPECIAL 1. Position the cursor to point to 'SPECIAL' on the SETUP menu by using the UP and DOWN buttons. 2. Select the mode required by pressing the UP or DOWN button. SPECIAL CAMERA ID COLOR SYNC MOTION DET PRIVACY MIRROR SHARPNESS... - Page 15 Camera Operation 5) When the camera ID is complete, select a position for the name to be displayed. Move the cursor onto 'POS' and then press the SET button. The ID will appear in the top left corner. Select the position where the ID is to be displayed by using the 4 directional buttons, and then press the SET button 6) Select 'END' and press the SET button to complete ID input.
-
Page 16: Exit
Camera Operation MOTION DETECTION: This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected; hence a single individual can conduct supervision efficiently. -
Page 17: Troubleshooting
Troubleshooting If there are problems with the camera operation, check the tables below. If the problem persists, please contact the agent who supplied the product. Problems Troubleshooting Nothing appears on the • Check the power connection. screen. • Check the video signal line connection. The video image is not •... -
Page 18: Specification
LOREX neither assumes nor authorizes any person to assume for it any other obligation or liability in correction with the sale or service of the Product. In no event shall LOREX be liable for any special or consequential damages arising from the use of the Product or arising from the malfunctioning or non-functioning of the Product, or for any delay in the performance of this warranty due to any cause beyond its control. - Page 19 The Purchaser must provide LOREX with a copy of his/ her original, dated bill of sale, receipt or invoice, failing which LOREX will not perform any of its obligations under this warranty. To claim on this warranty, proceed with the following steps: 1.
-
Page 20: High Resolution Color Day/Night Professional Camera
Model : CVC8010 High Resolution Color Day/Night Professional Camera Instruction Guide Model : CVC8010 High Resolution Color Day/Night Professional Camera Printed in KOREA Lorex Technologies Inc.