Tuning - Yamaha CRX-E300 Owner's Manual

You can find radio stations automatically and manually.
AUTO/MAN'L
NATURAL SOUND
STANDBY/ON
TIMER ADJ
TIMER DISPLAY MEMORY
BASS
PHONES
– +
PRESET/BAND
Automatic tuning
1
Select TUNER by turning INPUT so that the
frequency of a radio station appears in the display.
2
Press PRESET/BAND to select the reception band.
Do not select the preset tuning mode (in which
"PRESET" appears on the display).
3
Press AUTO/MAN'L so that "AUTO" appears in the
display.
4
Press PRESET/TUNING
frequency) or (for a lower frequency).
5
The unit starts searching for a station.
STEREO AUTO
TUNED
When the unit finds a station, the unit stops searching
and "TUNED" appears on the display.
6
If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
• If automatic tuning search does not find the desired station, try
manual tuning as described next.
• When an FM stereo broadcast with sufficient signal strength is
received, "STEREO" appears on the display and you can listen
to stereo sound.
10
PRESET/TUNING
VOLUME
CD RECEIVER CRX-E300
TIMER HOUR MIN MIN
AUTO/MAN'L PRESET/BAND
PRESET/TUNING
INPUT
TREBLE BALANCE
– +
L R
INPUT
(for a higher

TUNING

Manual tuning
1
/
Follow steps 1 and 2 described in "Automatic
tuning."
2
Press AUTO/MAN'L so that "AUTO" disappears
from the display.
3
Press PRESET/TUNING
MAX
frequency) or
your desired station.
• Each time you press PRESET/TUNING
, the frequency changes step by step.
(for a higher
(for a lower frequency) to select
or