Annual Maintenance Check; Quarterly Maintenance Check - Invacare Carroll CS Series User Manual

1. Unplug product before washing.
2. Make sure all electrical parts (motors, control box and
pendant) are not damaged and that all connection ports
are plugged. DO NOT allow liquids to enter electrical
components.
3. Disinfect and wash all components. DO NOT submerge
the bed frame or electrical parts.
4. DO NOT power wash or steam-clean. Use household
water pressure only.
5. Rinse thoroughly with water (maximum temperature
110°F or 43°C).
DO NOT use solvents, bleach, alcohol, petroleum
products, caustic agents, or highly alkaline or
acidic agents to clean the bed.
6. Retract each actuator to the minimum stroke length
before washing to avoid degreasing the piston rod.
7. Dry all components before storing.
1153410-Q

7.2 Annual Maintenance Check

• Inspect the covering of the bed's control panel and the
patient control panel to assure that the covering is not
cracked or damaged.
• Inspect for damaged or loose wiring. Have a qualified
technician replace any frayed or damaged cords.
• Inspect for secure grounding.
• Inspect rail latches. Ensure that all rails engage and
lock as specified.
• Inspect rails for wear and damage and replace as
required.
• Lubricate rail pivot points as needed with white lithium
grease.
• Inspect bed, rails, Assist Rails or Assist Bars for the
presence of tubing end caps and replace as required.
• Tighten, adjust or replace any parts or bolts etc. that
are loose or show signs of wear.
• Lubricate all mechanical hinge points, bushings, and
surface contact points with white lithium grease.
• Inspect for wear on clevis pins and hitch pins and
replace if worn or missing.
• Inspect the rails for noticeable scratches and chips.
Use a matching enamel touch up paint to retouch if
necessary. (Refer to Options for paint specification).

7.3 Quarterly Maintenance Check

• Unplug bed from wall outlet and verify battery function,
if equipped. Battery may be built-in or portable.
Maintenance
55