Scan From The Flatbed Glass - Xerox DocuMate 632 User Manual

Scan from the Flatbed Glass

DocuMate 632 Scanner User's Guide
Use the Flatbed glass to scan documents on lighter weight paper,
such as credit card receipts, or items that cannot be scanned with
the Automatic Document Feeder, such as pages in books.
NOTE: You must remove any pages from the Automatic
Document Feeder before scanning from the Flatbed glass. If
pages are in the Automatic Document Feeder, they will be
scanned instead of the page on the Flatbed glass.
To scan from the Flatbed glass:
1. Remove any pages from the Automatic Document Feeder.
2. Open the scanner lid and place the page on the scanner glass,
face down.
3. Align the paper with the arrows on the scanner for the size of
paper you are using.
4. Close the lid.
5. Press the Up or Down Destination Selector buttons to choose a
scan setting. Then press either the Simplex or Duplex button.
6. The face-down side of the page is scanned and the image is
sent to the selected Destination Application from the One
Touch utility.
Scanning
25