Load And Scan Documents - Xerox DocuMate 632 User Manual

Scanning

Load and Scan Documents

22
When you press either the Simplex or Duplex button, documents
are scanned using the scan settings indicated by the LED number.
The scanned images are then sent to a software application
(known as the Destination Application) on your computer.
1. Adjust the paper guide for the width of paper.
NOTE: Always remove any staples or paper clips from
documents before inserting them into the scanner's Automatic
Document Feeder. Staples and paper clips can jam the feed
mechanism and scratch the internal components. Also remove
any labels, stickers, or Post-It
the scanning process and get stuck in the scanner. Misuse as
described here will void your scanner's warranty.
2. Adjust the paper guides for the width of the paper then load the
documents so the tops of the pages are inserted into the
Automatic Document Feeder.
For Simplex (one-sided) scans, load the documents face up.
For Duplex (two-sided) scans, the documents can be face up or
down because both sides are scanned.
TM
notes that may come off during
DocuMate 632 Scanner User's Guide