Load And Scan Documents - Xerox DocuMate 152 User Manual

Load and Scan Documents

DocuMate 152 Scanner User's Guide
When you press either the Simplex or Duplex button, documents
are scanned using the scan settings indicated by the LED number.
The scanned images are then sent to a software application
(known as the Destination Application) on your computer.
1. Adjust the paper guide for the width of paper, and make sure
the input and output trays are fully extended.
NOTE: Always remove any staples or paper clips from
documents before inserting them into the scanner's Automatic
Document Feeder. Staples and paper clips can jam the feed
mechanism and scratch the internal components. Also remove
any labels, stickers, or Post-It™ notes that may come off during
the scanning process and get stuck in the scanner. Misuse as
described here will void your scanner's warranty.
2. Load the documents so the tops of the pages are inserted into
the Automatic Document Feeder.
For Simplex (one-sided) scans, load the documents face down.
Side 1 (the side of the page you want to scan) faces the paper
tray, and Side 2 faces outward.
For Duplex (two-sided) scans, the documents can be face up or
down because both sides are scanned.
Scanning
23