Infrared Remote Control
The Infrared transmitter LED on the back panel can be programmed to send IR Remote Control
codes. The IR command names are listed below are treated the same as outputs for other
kinds of devices in a configuration profile sheet. The specific codes sent for each command are
defined on a second sheet, named "IR Codes", that contains the Philips Pronto Hex Code for
the particular TV or A/V devices.
Output Name
ir_tv_channel_up
ir_tv_channel_down
ir_tv_volume_up
ir_tv_volume_down
ir_tv_on_off
ir_tv_select_input
ir_play
ir_stop
ir_fast_forward
ir_rewind
ir_skip_forward
ir_skip_back
ir_record
ir_pause
ir_mute
ir_guide
ir_menu
ir_cancel
ir_select
ir_up
ir_down
ir_left
ir_right
ir_aux1
ir_aux2
ir_aux3
ir_aux4
Table 7: Infrared Remote Control command list
Description
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
Xmit IR code from command table
77