Cronusmax - Full Crossover - Quadstick FPS User Manual

when the USB connection is briefly interrupted.
messages to the licensed controller on one port of a USB hub and the control messages to the
Quadstick on the other, preventing any interruptions.
Full instructions are available on the
CronusMax – Full Crossover
• Requires a
connected to the INPUT port on the
CronusMax
•
A Dual Shock 4 (DS4) controller connects
to one port on the hub and the Quadstick
connects to another. If U/A continues to
flash on the CronusMax display, reverse
the order of the ports.
• Enable PS4 Partial Crossover must be
OFF In CronusPro.
•
Allows running
CronusMax
•
Turn on PS4 from the front panel, not the
DS4.
The Quadstick must not change the USB emulation mode after power up when used in Full
Crossover. To make use of
source not found), it must enabled using the QMP or in the prefs.csv file. If using the default
USB mode 0, the PS4 Crossover Essentials Gamepack
CronusMax.com
USB 2.0 Hub that
Gamepacks in
Error: Reference source not found
Full Crossover routes the authentication
website.
is
the
(see page Error: Reference
is required to access the touchpad.
59